Mariner's Choice offers unparalleled resistance to water washout and the best protection in continuous high moisture environments both above and below water lines.

Get Current Pricing

Never-Seez« Mariner's Choice is a heavy duty anti-seize and extreme pressure lubricant formulated to assure absolute parts protection against seizure, galling and corrosion in fresh and salt water environments. Mariner's Choice offers unparalleled resistance to water washout and the best protection in continuous high moisture environments both above and below water lines. Suggested applications: Bilge piping, screw shafts, prop shaft bearing housings, winches, cables, and anchor lines, porthole studs, rigging and hoist cables, steel mills, suspension bridges, wind turbines, offshore rigging and other applications that are exposed to harsh salt water and fresh water conditions

Specifications:

  • Color: Black-Gray
  • Temperature Range: -22°F to 2,450°F (-30°C to 1,343°C)
  • Thickener Type: Calcium Complex
  • Particle Size: 3.5 Mil Maximum (75 microns)
  • Density (G/CM3): 1.31 to 1.39
  • ASTM D-92 Flash Point : >475°F (246°C)
  • ASTM B-117 Salt Fog Test, Hrs: 4,000
  • ASTM D-130 Copper Corrosion Test @ 212°F (100°C), 24 Hrs: No Corrosion
  • ASTM D-217 Work Penetration, 60 Strokes @ 77°F (25°C): 260-310
  • ASTM D-217 NLGI Grade: 1/2
  • ASTM D 566/Dropping Point: 572°F (300°C)
  • Torque Coefficient (K factor): .11
  • ASTM D-1264 Water Washout, % loss @ 100°F: <1.00
  • ASTM D-1264 Water Washout, % loss @ 175°F: <2.75
  • ASTM D-1743 Bearing Rust Test: Pass
  • ASTM D-2596 Four Ball EP Load Wear Index: 127.3
  • ASTM D-2596 Four Ball EP Last Non-Seizure Load (scar): 100 kgf (0.45mm)
  • ASTM D-2596 Four Ball EP Last Seizure Load (scar): 620 kgf (2.21 mm)
  • ASTM D-2596 Four Ball EP Weld Load: 800 kgf
  • ASTM D-4170 Fretting Wear @ 73°F (23°C), 22 Hrs, mg loss: 7.15